Curved rounded windows with raindrop glass, spiral stairs, scaffolding and a lot more old content revived (Patreon)
Content
Hey!
The "Funky Models" project has now slowly become a reworked and I think improved version of most of the old rendering content (e.g. R17). It now has crossed the 1100+ files mark.
Social Media: The funky models (especially the arches) were received incredibly well on social media, with multiple videos getting multiple millions of views. That was quite unexpected. I originally planned to release more gameplay friendly textures, but they almost got no attention in comparison to funky models or the modern stuff like pistons.
Now a lot of people in the comments requested windows that fit into the round arches. This is something that existed in the old R17 pack. I originally did not plan to do that for funky models, mainly because now that optifine got replaced with mods like iris, the features that these windows relied on (connected textures), no longer exist and would require people to install extra mods like Continuity.
So without Optifine's Connected Textures (ctm) I had to come up with a very different window system. It's quite tricky and I really hope it's not too complicated. I decided to mainly use doors for the big wide windows (up to 4 blocks tall) because their "hinge" blockstate property behaves a bit similar to ctm. When placed next to each other they automatically orient to form double doors or when placed next to a wall, the hinge is automatically on the side of the wall. The other types of windows are made from small single block pieces.
There are basically 2 separate window systems now:
- One with just the frame and no glass pane (easier to build with I think)
- One with glass (more complex to build and can be buggy with shaders etc)
Windows with Glass Panes:
I really wanted the majority of the windows to be able to have an actual glass pane in the frame. This is quite complicated because the geometry of 3 different separate blocks have to be in the same 1x1x1 block area: The arch, the window frame and the glass pane. The glass pane has to be a separate block because it is rendered completely differently than standard block models.
I used the same basic concept as in R17: You first place the glass panes and the windowframe is then created by placing specific doors or signs right infront of the glass pane. This allows player movement to remain mostly unobstructed. For doors you need to set their "powered" state to "true" in order to shift to match the glass pane layer. This is best done with the debug stick. For the doors I decided to not include the arch in the window frame model so that you can also use it without arches. To build the arch, please use the "window arch fix" blocks or the big cylindrical arch pieces. Overall this can be quite complex and confusing. So it's only really for advanced users. Use the non-glass windows for normal quick building! The glass also might be buggy with some shaders.
I highly recommend to check out my test map to see how i built it. (Download is in the guide)
Raindrop Glass:
It is now seamless and there is also a full block version of it. BTW: the raindrop texture is 4x higher than the other full blocks. For the 1024x version I used 4096x which is insane but it is needed in order to achieve the same quality as in R17. There is no curved version of the raindrop glass.
Curved glass and glass corners:
Very cool but very complex and not beginner friendly. I think it's mostly for showcase. Requires use of debug stick. You can build curved wall windows with different radii and of course you can connect multiple corners e.g. to create a zig zag pattern. And you can combine curved glass + rounded arch corners. There is also a curved window that connects wall and ceiling windows. (With curved glass).
Spiral Stairs:
The texture and model is mostly the same as in R17 but now I think it is much easier to use. No more weird placement guide needed. Start and end points no longer need special placement. No more cullface issues (e.g. invisible neighbouring block faces). The stairs can be created both as right and left rotating stairs (place at a 45 degree angle for the opposite direction). It is also fully walkable if you use the invisble slabs below the staircase blocks.
Vanilla Custom Entity Model trick:
Something that is usually not possible with vanilla resource packs: Changing entity models. This means things like chests, beds, golem statues, signs, shulker boxes etc can not have a custom 3d model. But there is a neat hack to get around that and I've not seen anyone else use this: If the entity supports transparent textures (mob heads, shulker boxes and signs do) you can make the vanilla model fully transparent to hide it and then inject a regular block model at this position by using blockstates. The result is not a true entity model. It's just a blockmodel but you have full access to its different block states (e.g "facing" state). This is perfect for me. And these models do not get voxelized by shaders like iterationRP which is great. This works because for some reason Minecraft still applies a block model for these block entities but in vanilla that model is empty.
Other changes:
• Added the industrial scaffolding from R15 (sadly the hardcoded geometry in iterationRP causes lighting issues)
• Added the R15 metal hole plates/trapdoors. If you power them (e.g. with debug stick) they turn into the box fan from R15.
• Added a blue glowing light - similar to the emerald block from R16.
• Added a fully white light block to get maximum indoor brightness or neutral white balance.
A question that was asked multiple times: Why not make a mod? Well, I know nothing about modding, java etc and to actually deliver a well developed up-to-date mod I think I can't just go the easy way (tools like MCreator etc). But the main reason: This all being a vanilla resource pack (with all the constraints that come with that) is far more satisfying I think and I love to see when people are surprised that this is actually a vanilla resource pack and not just a bad mod. I think making this as a mod would be super lame and unimpressive because you can load any arbitrary 3d model into the game. And from what I've seen there are already some architecture themed mods that add some form of arches, pillars etc. One is called "architecture craft" for example.
However, I understand that it would be cool to be able to use my models as separate items instead of the vanilla ones. This is why I'd be totally fine with someone from the community converting the pack to a simple mod as long as it's clear that the main/official project is the resource pack.
Quick reminder: The blocks that I choose for the custom models are things that were added more recently to the game. This means: You can use this pack on oldschool maps/builds (e.g. Broville) and not encounter any weird custom models.
DOWNLOADS:
As always, the downloads can be found on the download post: https://www.patreon.com/posts/public-downloads-127596976